Cisco 4700M Administration Manual page 220

Configuring SNMP
Command
snmp-server user user_name [ group_name ]
[auth {md5 | sha} password1 [localizedkey
| priv { password2 | aes-128 password2 }]]
(continued)
no snmp-server user user_name [ group_name ]
[auth {md5 | sha} password1 [localizedkey
| priv { password2 | aes-128 password2 }]]
Example:
host1/Admin(config)# no snmp-server user
joe Network-Monitor auth sha abcd1234
Step 3
do copy running-config startup-config
Example:
host1/Admin(config)# do copy
running-config startup-config
Cisco 4700 Series Application Control Engine Appliance Administration Guide
7-34
Purpose
password1—User authentication password. Enter an
•
unquoted text string with no space and a maximum of 130
alphanumeric characters. The ACE automatically
synchronizes the SNMP authentication password as the
password for the CLI user. The ACE supports the following
special characters in a password:
, . / = + - ^ @ ! % ~ # $ * ( )
Note that the ACE encrypts clear text passwords in the
running-config.
localizedkey—(Optional) Specifies that the password is in a
•
localized key format for security encryption.
priv—(Optional) Specifies encryption parameters for the
•
user. The priv option and the aes-128 option indicate that
this privacy password is for generating 128-bit AES key.
aes-128—Specifies the 128-byte Advanced Encryption
•
Standard (AES) algorithm for privacy. AES is a symmetric
cipher algorithm and is one of the privacy protocols for
SNMP message encryption. It conforms with RFC 3826.
For an SNMPv3 operation using the external AAA
Note
server, user configurations on this server require AES for
SNMP PDU encryption.
password2—Encryption password for the user. The AES
•
priv password can have a minimum of eight charac ters. If the
passphrases are specified in clear text, you can specify a
maximum of 64 alphanumeric characters. If you use the
localized key, you can specify a maximum of 130
alphanumeric characters. Spaces are not allowed. The ACE
supports the following special characters in a password:
, . / = + - ^ @ ! % ~ # $ * ( )
Note that the ACE encrypts clear text passwords in the
running-config.
(Optional) Disables the SNMP user configuration or removes an
SNMP user.
(Optional) Copies the running configuration to the startup
configuration.
Chapter 7 Configuring SNMP
OL-20823-01