Advertisement
Quick Links
Advertisement
Related Manuals for Cisco XO
Summary of Contents for Cisco XO
- Page 1 XO™ VPN Remote Access Client Setup Guide for Cisco Unity Client 4.0.x version 1.1 Copy...
-
Page 2: Installation Instructions
Until then, please feel free to contact your security engineer with any questions. Thank you. ii) Obtain login information from your Administrator / Technical Contact. Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc . https://isc1.xo.net:8443/isc/Login.jsp http://admin.xo.com... - Page 3 Click the link that says “Click Here to download the VPN Remote Access client.” Save the file to your local machine. Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc .
- Page 4 ***NOTE: these are Cisco hardware and software requirements. XO is not responsible for supporting any non-Windows based Remote Access clients. Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc . Operating System •...
- Page 5 (1) Remove existing Cisco Unity Client installation. When asked if you want to retain configuration files, click “YES” Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc . Administrative Tools Add/Remove Programs...
- Page 6 Continue installing the new version of the client once computer has rebooted. Accept the license agreement and choose a location for the installation. vi) Reboot and then launch the client to begin configuration Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc .
- Page 7 Navigate to the installed client by going to Start Programs Cisco Systems VPN Client VPN Client ii) Click on “New” iii) Choose a name for the connection, and then refer to the email sent by the XO Managed Security Engineer to fill in the rest of the required information.
- Page 8 (1) This tab is used for configuring access from a Private, or non-routable IP (RFC 1918). Not all XO VPN security devices will support this feature. Contact your Managed Security Engineer for clarification. v) Click “Save” h) Using the Client to connect to your XO VPN Navigate to Start Program Files Cisco VPN Client VPN Client ii) Highlight the connection entry, and then click “Connect.”...
- Page 9 PC and the number of packets that have passed through the encrypted tunnel. (1) Select “Route Details” to confirm privately routed subnets. Enjoy your XO VPN Remote Access Client! Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc .
-
Page 10: Frequently Asked Questions
Encapsulation Security Payload (ESP) – IP 50 Authentication Header (AH) – IP 51 Internet Security Association and Key Management Protocol (ISAKMP) – UDP 500 Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc . - Page 11 2. At the prompt, type “ipconfig”, and write down the information next to “IP Address”. 3. If the IP address starts with any of the following, continue reading. If not, proceed to c) Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc . Type “cmd”.
- Page 12 Windows 98, 98SE, Millenium, and XP Home do not support Windows domain authentication. Contact your administrator if you are using one of these Operating Systems. Further clarification can be obtained from Microsoft’s website at http://support.microsoft.com. Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc .