Cisco 4700M Administration Manual page 227

Chapter 7 Configuring SNMP
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin(config)#
Step 2
snmp-server enable traps
[ notification_type ] [ notification_option ]
Example:
host1/Admin(config)# snmp-server enable
traps slb real
OL-20823-01
Purpose
Enters global configuration mode.
Enables the ACE to send SNMP traps and informs to the NMS.
The keywords, arguments, and options are as follows:
notification_type—(Optional) Type of notification to enable.
•
If no type is specified, the ACE sends all notifications.
Specify one of the following keywords as the
notification_type:
license—Sends SNMP license manager notifications.
–
This keyword appears only in the Admin context.
slb—Sends server load-balancing notifications. When
–
you specify the slb keyword, you can specify a
notification_option value.
snmp—Sends SNMP notifications. When you specify
–
the snmp keyword, you can specify a
notification_option value.
syslog—Sends error message notifications (Cisco
–
Syslog MIB).
To enable system messages to be sent as traps to the
Note
NMS, you canspecify the logging history command.
You specify the level of messages to be sent with the
logging history level command. You must also
enable syslog traps by using the snmp-server enable
traps command. See the Cisco 4700 Series
Application Control Engine Appliance System
Message Guide for details.
virtual-context—Sends virtual context (ACE user
–
context) change notifications. This keyword appears
only in the Admin context.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring SNMP
7-41