Creating A Layer 3 And Layer 4 Policy Map - Cisco 4700M Administration Manual

Application control engine appliance
Hide thumbs Also See for 4700M:
Table of Contents

Advertisement

Chapter 8
Configuring the XML Interface
Command
no match protocol {http | https}
{any | source-address ip_address
mask }
Example:
host1/Admin(config-cmap-mgmt)# no
match protocol xml-https
source-address 192.168.10.1
255.255.0.0
Step 5
do copy running-config
startup-config
Example:
host1/Admin(config-cmap-mgmt)# do
copy running-config startup-config

Creating a Layer 3 and Layer 4 Policy Map

This section describes how to create a Layer 3 and Layer 4 policy map, associate a class map with the
policy map, and specify the policy map actions. A Layer 3 and Layer 4 policy map defines the actions
executed on HTTP or HTTPS management traffic that matches the specified classifications.
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin#(config)#
Step 2
policy-map type management first-match
map_name
Example:
host1/Admin(config)# policy-map type
management first-match
MGMT_XML-HTTPS_POLICY
host1/Admin(config-pmap-mgmt)#
no policy-map type management first-match
map_name
Example:
host1/Admin(config)# no policy-map type
management first-match
MGMT_XML-HTTPS_POLICY
OL-20823-01
Purpose
(Optional) Deselects the specified network management protocol match
criteria from the class map.
(Optional) Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Configures a Layer 3 and Layer 4 policy map that permits the
management traffic received by the ACE. The ACE executes the
action for the first matching classification. The ACE does not
execute any additional actions.
The map_name argument specifies the name assigned to the
Layer 3 and Layer 4 network management policy map. Enter an
unquoted text string with no spaces and a maximum of
64 alphanumeric characters.
This command enters the policy map management configuration
mode.
(Optional) Removes a network traffic management policy map
from the ACE.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring the XML Interface
8-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

4700 series

Table of Contents