Enabling Snmp Notifications - Cisco 4700M Administration Manual

Configuring SNMP
Command
no snmp-server host host_address
{ community-string_username | informs |
traps | version {1{udp-port} | 2c
{udp-port} | 3 [auth | noauth | priv]}}
Example:
host1/Admin(config)# no snmp-server host
192.168.1.1 traps version 2c
SNMP_Community1 udp-port 500
Step 3
do copy running-config startup-config
Example:
host1/Admin(config)# do copy
running-config startup-config

Enabling SNMP Notifications

This section describes how to enable the ACE to send SNMP notification traps and inform requests to
the NMS. Notification traps and inform requests are system alerts that the ACE generates when certain
events occur. SNMP notifications can be sent to the NMS as traps or inform requests. By default, no
SNMP notification is defined or issued.
Restrictions
This topic includes the following restrictions:
•
•
Prerequisites
The snmp-server enable traps command is used with the snmp-server host command (see the
"Configuring SNMP Notification Hosts"
receives the SNMP notifications. To send notifications, you must configure at least one SNMP server
host.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
7-40
To configure the ACE to send the SNMP notifications, specify at least one snmp-server enable
traps command. To enable multiple types of notifications, you must enter a separate snmp-server
enable traps command for each notification type and notification option. If you enter the command
without any keywords, the ACE enables all notification types and traps.
The notification types used in the snmp-server enable traps command all have an associated MIB
object that globally enables or disables them. However, not all of the notification types available in
the snmp-server host command have notificationEnable MIB objects, so some of the notification
types cannot be controlled by using the snmp-server enable command.
Purpose
Removes the specified host.
(Optional) Copies the running configuration to the startup
configuration.
section). The snmp-server host command specifies which host
Chapter 7 Configuring SNMP
OL-20823-01