Cisco 4700M Administration Manual page 64

Enabling Remote Access to the ACE
Command
no description
Example:
host1/Admin(config-pmap-mgmt)# no
description
Step 4
class { name1 [insert-before name2 ] |
class-default}
Example:
host1/Admin(config-pmap-mgmt)# class
L4_REMOTE_ACCESS_CLASS
host1/Admin(config-pmap-mgmt-c)#
no class { name1 [insert-before name2 ] |
class-default}
Example:
host1/Admin(config-pmap-mgmt)# no class
L4_REMOTE_ACCESS_CLASS
Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-10
Chapter 2
Purpose
(Optional) Removes a description from the policy map.
Specifies a Layer 3 and Layer 4 traffic class created with the
class-map command to associate network traffic with the traffic
policy.
The arguments, keywords, and options are as follows:
name1—Name of a previously defined Layer 3 and Layer 4
•
traffic class, configured with the class-map command, to
associate traffic to the traffic policy. Enter an unquoted text
string with no spaces and a maximum of 64 alphanumeric
characters.
insert-before name2—(Optional) Places the current class
•
map ahead of anexisting class map or inline match condition
specified by the name2 argument in the policy map
configuration. The ACE does not save the sequence
reordering as part of the configuration. Enter an unquoted
text string with no spaces and a maximum of 64
alphanumeric characters.
class-default—Specifies the class-default class map for the
•
Layer 3 and Layer 4 traffic policy. This class map is a
reserved class map created by the ACE. You cannot delete or
modify this class. All network traffic that fails to meet the
other matching criteria in the named class map belongs to the
default traffic class. If none of the specified classifications
match, the ACE then matches the action specified under the
class class-default command. The class-default class map
has an implicit match any statement in it and is used to
match any traffic classification. The class-default class map
has an implicit match any statement that matches all traffic.
This command enters the policy map management class
configuration mode.
(Optional) Remove a class map from a Lay er 3 and Layer 4 policy
map.
Enabling Remote Access to the ACE
OL-20823-01