Cisco 4700M Administration Manual page 62

Enabling Remote Access to the ACE
Command
match protocol
(continued)
no match protocol {http | https | icmp |
kalap-udp | snmp | ssh | telnet |
xml-https} {any | source-address
ip_address mask }
Example:
ACE_1/Admin(config-cmap-mgmt)# no match
protocol ssh source-address 192.168.10.1
255.255.255.0
Step 4
description text
Example:
host1/Admin(config-cmap-mgmt)# description
Allow Telnet access to the ACE
no description text
Example:
host1/Admin(config-cmap-mgmt)# no
description
Step 5
do copy running-config startup-config
Example:
ACE_1/Admin(config-cmap-mgmt))# do copy
running-config startup-config
Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-8
Chapter 2
Purpose
telnet—Specifies a Telnet remote connection to the ACE.
•
The configuration of the Telnet management protocol is
described in the "Configuring the Maximum Number of
Telnet Management Sessions"
xml-https—Specifies HTTPS as transfer protocol to send
•
and receive XML documents between the ACE and a
Network Management System (NMS). Communication is
performed using port 10443. The use of the HTTPS
management protocol for XML usage is described in
Chapter 8, Configuring the XML
You can enable both https and xml-https in a Layer 3
Note
and Layer 4 network management class map.
any—Specifies any client source address for the
•
management traffic classification.
source-address—Specifies a client source host IP address
•
and subnet mask as the network traffic matching criteria. As
part of the classification, the ACE implicitly obtains the
destination IP address from the interface on which you apply
the policy map.
ip_address—Source IP address of the client.
•
mask—Subnet mask of the client in dotted-decimal notation.
•
(Optional) Deselects the specified network management
protocol match criteria from the class map.
Provides a brief summary about the Layer 3 and Layer 4 remote
management class map.
(Optional) Removes the description from the class map.
(Optional) Copies the running configuration to the startup
configuration.
Enabling Remote Access to the ACE
section.
Interface.
OL-20823-01