Clearing Snmp Service Policy Statistics; Example Of An Snmp Configuration - Cisco 4700M Administration Manual

Chapter 7 Configuring SNMP

Clearing SNMP Service Policy Statistics

To clear the statistical information of the service policies associated with your SNMP configuration, use
the following clear command:
Command
clear service-policy policy_name

Example of an SNMP Configuration

The following example illustrates a running-configuration that verifies the current status of a real server
through SNMP and the CLI. Italso verifies that SNMP traps are sent when a real server or virtual server
is not operational. This example illustrates that you can restrict the client source host IP address allowed
to connect to the ACE. The policy map is applied to all of the VLAN interfaces associated with the
context. The SNMP configuration appears in bold in the example.
access-list ACL1 line 10 extended permit ip any any
rserver host SERVER1
ip address 192.168.252.245
inservice
rserver host SERVER2
ip address 192.168.252.246
inservice
rserver host SERVER3
ip address 192.168.252.247
inservice
serverfarm host SFARM1
probe HTTP_PROBE
rserver SERVER1
serverfarm host SFARM2
probe HTTP
rserver SERVER2
rserver SERVER3
class-map type http loadbalance match-all L7_INDEX-HTML_CLASS
2 match http url /index.html
class-map match-all L4_MAX-CONN-VIP_105_CLASS
2 match virtual-address 192.168.120.105 any
class-map type management match-any L4_REMOTE-ACCESS-LOCAL_CLASS
description Enables SNMP remote management for local users
1 match protocol snmp source-address 192.168.0.0 255.248.0.0
2 match protocol snmp source-address 172.16.64.0 255.255.252.0
class-map type http loadbalance match-all L7_URL*_CLASS
2 match http url .*
policy-map type management first-match L4_SNMP-REMOTE-MGT_POLICY
class L4_REMOTE-ACCESS-LOCAL_CLASS
OL-20823-01
Purpose
Clears the service policy statistics.
For the policy_name argument, enter the identifier of an e xisting policy map
that is currently in service (applied to an interface).
conn-limit max 3 min 2
inservice
conn-limit max 500 min 2
inservice
conn-limit max 500 min 2
inservice
permit
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Example of an SNMP Configuration
7-59