Rolling Back A Running Configuration; Displaying Checkpoint Information - Cisco 4700M Administration Manual

Chapter 4 Managing the ACE Software

Rolling Back a Running Configuration

This section describes how to roll back the current running configuration to the previously checkpointed
running configuration for the current context.
Detailed Steps
Command
Step 1
show checkpoint all
Example:
host1/Admin# show checkpoint all
Step 2
show checkpoint detail name
Example:
host1/Admin# show checkpoint MYCHECKPOINT5
Step 3
checkpoint rollback name
Example:
host1/Admin# checkpoint delete
MYCHECKPOINT5
This operation will rollback the system's
running configuration to the checkpoint's
configuration.
Do you wish to proceed? (y/n)
Rollback in progress, please wait...
Generating configuration....
Rollback succeeded
host1/Admin#

Displaying Checkpoint Information

To display checkpoint information, perform the following task:
Command
show checkpoint {all | detail name} [|] [>]
Table 4-1
Table 4-1
Field
Checkpoint
OL-20823-01
[n] y
Purpose
Displays information relating to the configured checkpoints.
all—Displays a list of all existing checkpoints. The show output
•
includes checkpoint time stamps.
detail name—Displays the running configuration of the specified
•
checkpoint.
describes the fields that appear in the show checkpoint all command output.
Field Descriptions for the show checkpoint all Command Output
Description
Name of the checkpoint
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Using the Configuration Checkpoint and Rollback Service
Purpose
(Optional) Displays a list of all existing checkpoints.
(Optional) Displays the running configuration of the specified
checkpoint.
Rolls back the current running configuration to the previously
checkpointed running configuration for the current context.
The name argument specifies the unique identifier of the
checkpoint. Enter a text string with no spaces and a maximum of
25 alphanumeric characters.
4-29