Cisco 4700M Administration Manual page 192

Information About SNMP
Table 7-2 SNMP MIB Support (continued)
MIB Support
CISCO-ENTITY-
VENDORTYPE-OID-MIB
(continued)
ENTITY-MIB
ENTITY-SENSOR-MIB
Cisco 4700 Series Application Control Engine Appliance Administration Guide
7-6
Capability MIB
N/A
CISCO-ENTITY-
CAPABILITY
CISCO-ENTITY-
SENSOR-RFC-
CAPABILITY
Description
Product Name (PID)/entPhysicalVendorType
Voltage Sensor
cevSensorPSOutput {cevSensor 39}
CPU fan sensor
cevSensorCpuFanSpeed {cevSensor 58}
DIMM fan sensor
cevSensorACE4710K9DimmFanSpeed
{cevSensor 59}
PCI fan sensor
cevSensorACE4710K9PciFanSpeed
{cevSensor 60}
CPU temperature sensor
cevSensorACE4710K9 CPUTemp
{cevSensor 56}
Ambient temperature sensor
cevSensorACE4710K9 AmbientTemp
{cevSensor 57}
Provides basic management and identification of physical and
logical entities within a network device. Software support for the
ENTITY-MIB focuses on the physical entities within the ACE.
This MIB provides details on each module, power supply, fan, and
sensors within the ACE appliance chassis. It provides sufficient
information to correctly map the containment of these entities
within the ACE.
The ENTITY-MIB is supported only in the Admin context.
The ENTITY-MIB is described in RFC 4133.
Contains a single group called the entitySensorValueGroup, which
allows objects to convey the current value and status of a physical
sensor. The entitySensorValueGroup contains a single table,
called the entPhySensorTable, which provides a few read-only
objects that identify the type of data units, scaling factor,
precision, current value, and operational status of the sensor.
The ENTITY-SENSOR-MIB is supported only in the Admin
context.
The ENTITY-SENSOR-MIB is described in RFC 3433.
Chapter 7 Configuring SNMP
OL-20823-01