Displaying Or Clearing Xml Service Policy Statistics; Displaying Xml Service Policy Statistics; Clearing Xml Service Policy Statistics - Cisco 4700M Administration Manual

Chapter 8 Configuring the XML Interface

Displaying or Clearing XML Service Policy Statistics

This section describes how to display or clear XML service policy statistics and contains the following
topics:
•
•

Displaying XML Service Policy Statistics

To display the statistical information of the service policies associated with your XML configuration,
perform the following task:
Command
show service-policy policy_name [detail]
Examples
The following example shows the output for the MGMT_XML-HTTPS_POLICY policy map by using
the show service-policy command:
host1/Admin# show service-policy MGMT_XML-HTTPS_POLICY
Status
Description: Allow mgmt protocols
-----------------------------------------
Context Global Policy:
service-policy: MGMT_XML-HTTPS_POLICY

Clearing XML Service Policy Statistics

To clear the statistical information of the service policies associated with your XML configuration,
perform the following task:
Command
clear service-policy policy_name
OL-20823-01
Displaying XML Service Policy Statistics
Clearing XML Service Policy Statistics
Purpose
Displays service policy statistics for a Layer 3 and Layer 4 management
policy map.
The keywords, options, and arguments are as follows:
•
•
Note
: ACTIVE
Purpose
Clears the service policy statistics.
For the policy_name argument, enter the identifier of an existing policy
map that is currently in service (applied to an interface) as an unquoted text
string with a maximum of 64 alphanumeric characters.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
policy_name—Identifier of an existing policy map that is currently in
service (applied to an interface) as an unquoted text string with a
maximum of 64 alphanumeric characters.
detail—(Optional) Displays a more detailed listing of policy map
statistics and status information.
The ACE updates the counters that the show service-policy
command displays after the applicable connections are closed.
Displaying or Clearing XML Service Policy Statistics
8-19