Cisco 4700M Administration Manual page 105

Chapter 4 Managing the ACE Software
Copying Files to Another Directory on the ACE
This section describes how to copy a file from one directory in the disk0: file system of Flash memory to
another directory in disk0:.
Detailed Steps
Command
Step 1
dir disk0:
Example:
host1/Admin# dir disk0:
Step 2
copy disk0:[ path/ ] filename1
{disk0:[ path ] filename2 }
Example:
host1/Admin# copy disk0:samplefile
disk0:MYSTORAGE/SAMPLEFILE
Copying Licenses
This section describes how to create a backup license for the ACE licenses in .tar format and copy it to
the disk0: file system. To protect your license files, we recommend that you back up your license files
to the ACE Flash memory as tar files.
OL-20823-01
Purpose
(Optional) Displays the contents of the disk0: file system.
Copies a file from one directory in the disk0: file system of Flash
memory to another directory in disk0:.
The keywords and arguments are as follows:
[path/]filename1—Name of the file to copy. Use the dir
•
disk0: command to view the files available in the disk0: file
system. If you do not provide the optional path, the ACE
copies the file from the root directory on the disk0: file
system.
disk0:[path]filename2—Specifies the file destination in the
•
disk0: directory of the current context. If you do not provide
the optional path, the ACE copies the file to the root directory
on the disk0: file system.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Using the File System on the ACE
4-9