Cisco 4700M Administration Manual page 134

Displaying System Processes and Memory Resources Limits
Table 5-5
Table 5-5 Field Descriptions for the show processes log Command
Field
Process
PID
Normal-exit
Stack
Core
Log-create-time
Table 5-6
Table 5-6 Field Descriptions for the show processes log
Field
Service
Description
Started at
Stopped at
Uptime
Start type
Death reason
Exit code
CWD
Virtual memory
PID
SAP
UUID
Table 5-7
Table 5-7 Field Descriptions for the show processes memory Command
Field
PID
MemAlloc
StackBase/Ptr
Process
Cisco 4700 Series Application Control Engine Appliance Administration Guide
5-6
describes the fields in the show processes log command output.
Description
Name of the process
Process identifier
Status of whether the process exited normally
Status of whether a stack trace is in the log
Status of whether a core file exists
Time when the log file was generated
describes the fields in the show processes log details | pid command output.
Description
Name of the service.
Brief description of the service.
Time the process started.
Time the process stopped.
Length of time that the process was active.
System manager option that indicates the process restartability characteristics (that is, whether
it is a stateless restart or stateful restart).
Reason that the system manager killed the process (for example, no sysmgr heartbeats).
Exit code with which the process exited.
Normally, the Exit code provides the signal number which killed the process.
Note
Current working directory.
Virtual memory addresses where the code, data heap, and stack of the process are located.
Process identifier.
Service access point.
Universal unique identifier of the CPU.
describes the fields in the show processes memory command output.
Description
Process identifier
Total memory allocated by the process
Process stack base and current stack pointer in hex format
Name of the process
Chapter 5 Displaying ACE Hardware and Software System Information
|
pid details Command
OL-20823-01