Service Setup (Enable Web Services); Printer Setup - EFI Pi6500 Pro Configuration Manual

3

3-23 Printer Setup

Service Setup (Enable LPD Printing Service)
Enable LPD Printing Service
Service Setup (Enable Port 9100)
Enable Port 9100 Print Services
TCP/IP socket to the Pi6500 Pro at Port 9100 to download a print job.
Port 9100 Queue
connections.

Service Setup (Enable Web Services)

Enable Web Services
page 4-15). TCP/IP must already be enabled on the Pi6500 Pro and on user
workstations. The Fiery WebTools include Fiery WebSpooler, Status, WebLink,
WebSetup, WebScan, WebDownloader, and Installer. A Java-enabled Web browser and
a valid IP address are required for each user. See Getting Started for details on
supported browsers and workstation requirements.
Printer Setup
From this window, you can access two tabs: Printer Setup and Paper Setup.
In the following illustration, "Device name" represents the model of the copier
N :
OTE
connected to the Pi6500 Pro, which is 65BW-M Pro.
—Select to allow lpd printing.
—This option allows application programs to open a
—You can attach Port 9100 to any of the published Pi6500 Pro print
—Select to make the Fiery WebTools available to users (see