Ethernet (Port Setup) - EFI Pi6500 Pro Configuration Manual

2
2-12 Setting up the Pi6500 Pro
Network Setup
Port Setup
Network Setup
Port Setup
Ethernet Setup
Enable Ethernet
Yes/No [Yes]
Select Yes if you have Ethernet cabling connected to the Pi6500 Pro.
Ethernet Speed
Auto Detect/100 Mbps/10 Mbps [Auto Detect]
Select Auto Detect if your network environment is mixed, or select the speed of the
network to which the Pi6500 Pro is attached.
Token Ring Setup
Enable Token Ring
Yes/No [No]
Select Yes if the Pi6500 Pro is to be connected to a Token Ring network.
Token Ring Speed
4 Mbps/16 Mbps/Auto Detect [Auto Detect]
Select Auto Detect if your network environment is mixed, or select the speed
(4 Mbps or 16 Mbps) of the network to which the Pi6500 Pro is attached.
Max. Frame Size (bytes)
4202/2154/1130/632 [4202]
Select the maximum frame size recommended by the network administrator at your
site. If you are uncertain of the setting to use, select the default value (4202).
Enable Source Routing
Yes/No [No]