EFI Pi6500 Pro Configuration Manual page 68

2
2-38 Setting up the Pi6500 Pro
Publish Direct Connection
Yes/No [Yes]
This option enables users to print (or download) jobs to the Pi6500 Pro without
spooling. Jobs printed to the Direct connection are not saved in the Printed queue.
If you plan to download fonts to the Pi6500 Pro, you must publish the Direct
connection.
Publish Print Queue
Yes/No [Yes]
This option enables users to print (or download) jobs to the Print queue. Jobs printed
to the Print queue are spooled to the Pi6500 Pro disk and printed on a first-in, first-out
basis. Only the connections published in Printer Setup are available to users.
• To print to the Pi6500 Pro over a TCP/IP network, you must publish either (or
both) the Print queue and the Hold queue.
• To print to the Pi6500 Pro over the parallel port, you must publish a queue or
publish the Direct connection.
Publish Hold Queue
Yes/No [Yes]
Use this option to enable users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can be printed only by copying or moving them to the Print queue
with Fiery WebSpooler.