Configuring The Pi6500 Pro And Clients For Fiery Webtools - EFI Pi6500 Pro Configuration Manual

4
4-15 Configuring the Pi6500 Pro and clients for Fiery WebTools
Configuring clients of a Windows NT 4.0 server
Each client of a Windows NT 4.0 server is already using a network protocol to
communicate with the server. Each client can print to the Pi6500 Pro if it has been
shared by a Windows NT 4.0 Server or Windows NT 4.0 Workstation computer. In
that case the client does not have to use the same network protocol to connect to the
Windows NT 4.0 server as the server uses to communicate with the Pi6500 Pro.
T
O CONNECT AND PRINT TO THE
W NT 4.0
INDOWS SERVER
• For Windows NT 4.0 Workstation clients, before printing, connect to the print server
computer and select the Pi6500 Pro. Right-click and select Open. When prompted,
click Yes to have Windows set up the printer.
After clients have set up the printer, they can choose it from the Print Setup, Page
Setup, or Print dialog box of their application. Clients can change printing options for
their own job, but printer properties are grayed and not available for changing. When
you choose Print from a client, the job is transmitted to the Windows NT 4.0 print
server, and from there to the selected queue on the Pi6500 Pro. The job is listed in the
Print Manager on the client workstation, and the administrator can track it in the
Pi6500 Pro window in the Print Manager on the Windows NT 4.0 print server.
Configuring the Pi6500 Pro and clients
for Fiery WebTools
The Fiery WebTools offer access to many Pi6500 Pro functions via the Internet (or
your company's intranet), thus providing additional flexibility in remote management.
You can access the Fiery WebTools from a Mac OS or Windows computer.
Fiery WebSetup is supported on Windows computers only.
N :
OTE
P 6500 P
I RO SHARED BY THE