Table of Contents
Advertisement
2
2-7 Server Setup options
If you make a mistake during Setup, you can always use the Menu button to
N
:
OTE
cancel without saving changes. If you are viewing a Setup screen, pressing the Menu
button cancels what you are doing in the current screen to bring you to the next
higher-level menu. You may need to press Menu more than once to return to the top
level for the particular Setup procedure with which you are working. Once at the top
level, you can enter the current Setup again, or exit without making changes.
When you have entered all the settings or made all the changes you want, you need to
save the changes. You are usually prompted to do so. If you choose Yes, your settings
overwrite previous settings. If you choose No, your previous settings are retained. If
necessary, the Pi6500 Pro reboots after you exit from the Setup menu.
Server Setup options
The Server Setup menu lets you specify system information that pertains to the
Pi6500 Pro itself and all users. Accessing the menu is described on page 2-2.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
When you choose Server Setup, the options appear in sequence, as described below.
Default values, where applicable, appear in square brackets.
Server Name
Default server name
Use this option to give the Pi6500 Pro a name (up to 10 characters long). This is the
name that will appear in the Chooser on an AppleTalk network.
If you have multiple Pi6500 Pro servers and give them the same name, a unique
number is appended to the name that appears in the Chooser. Although this routes
jobs correctly, it may be inconvenient to users and is not a recommended practice.
System Date
Use this option to change the system date. Enter the date in the standard form for your
usage: either MM/DD/YY or DD/MM/YY. The date is used on the cover page and in
Job Logs.
Press button for Server Setup
Advertisement
Table of Contents
