Table of Contents
Advertisement
1
1-2 Connecting to the Network
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
•
Physically connecting the Pi6500 Pro to a functioning network
Prepare a network node for the Pi6500 Pro—obtain cable and route it to the location
where the Pi6500 Pro will be installed (near the copier), and attach the cable to the
network interface of the Pi6500 Pro. See page 1-11 for details.
•
Configuring network servers
When network servers are required, you need to configure those servers to provide
client access to the Pi6500 Pro as a PostScript or PCL printer. See Chapter 4 for
information on configuring network servers in Windows and UNIX network
environments.
•
Pi6500 Pro Setup
Configure the Pi6500 Pro for your particular printing and network environment. See
Chapter 2 for details.
•
Client setup
Install the files needed for printing, install additional user software, and connect the
client to the Pi6500 Pro over the network. These steps are described in Getting Started,
and some information is provided in Chapter 4 of this manual.
•
System administration
Monitor and maintain system performance and troubleshoot problems that arise. See
Chapter 5 for details.
Advertisement
Table of Contents
