Pi6500 Pro On A Netware 3.X, 4.X, Or 5.X Network - EFI Pi6500 Pro Configuration Manual

4
4-4 Setting up Network Servers
6. In the Configure Novell PDS for Printer Agent dialog box, select "((NONE))", and
click OK.
7. In the Configure Port Handler dialog box, choose "Remote LPR on IP" as the
connection type, and click Next.
8. For Host Address, enter the IP address of the Pi6500 Pro.
9. For Printer Name, enter the name of the Pi6500 Pro print connection you want users
to print to, and click Finish.
This name must be either
10. In the Select Printer Drivers dialog box, select the printer driver for Windows 9x/Me
and the driver for Windows NT 4.
11. Click Continue, and click OK.

Pi6500 Pro on a NetWare 3.x, 4.x, or 5.x network

The NetWise software built into the Pi6500 Pro supports the following network
operating environments:
• NetWare 4.x or 5.x—Novell Directory Services (NDS)
• NetWare 3.x—Bindery services
• Servers running NetWare 4.x or 5.x in bindery emulation mode
Setting up a NetWare environment correctly requires the presence and active
N :
OTE
cooperation of the Novell network administrator. You must have administrator
privileges on the network to create new NDS or bindery objects.
The term "bindery server" is used to refer to a Novell file server running NetWare 3.x,
NetWare 4.x, or Netware 5.x in bindery emulation mode. The term "NDS" is used to
describe components of a NetWare operating system running NetWare 4.x in native
mode.
NetWare clients print to the Pi6500 Pro through the Novell network server. Server
setup and client network setup are outlined here. Client printing setup is described in
Getting Started, and printing is described in the Printing Guide.
or .
print hold