Network Setup Options - EFI Pi6500 Pro Configuration Manual

2

2-9 Network Setup options

Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Exit Network Setup
Port Setup
Protocol Setup
Service Setup
Network Setup
Clear Each Scan Job
After 1 week/ After 1 day/Manually/Now [After 1 day]
Specify how you want to remove scanned data from the HDD. If you select Manually,
the scanned data remains on the HDD until specifically deleted, or until all scanned
jobs are cleared by the Administrator.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select No to return to the
main Setup menu without making any changes.
Network Setup options
Network Setup configures the Pi6500 Pro to receive print jobs over the network
systems that will be used at your site.
In the Setup menu, choose Network Setup.
In Network Setup, you specify network addresses and names to be used by
workstations, servers, and the Pi6500 Pro when they communicate with each other.
The Network Setup menu includes three submenus that let you choose port types,
protocols, and network services. You must perform Port Setup and enable at least one
port.
For each item you enable, you are prompted to enter settings for that item. Default
values, where applicable, appear in square brackets.
You need to display and select options only for the network systems that are currently
used at your site. If your network requirements change, you can change the Network
Setup at any time.
If the Pi6500 Pro is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print job. When the parallel port
and one or two network ports are enabled, print jobs can be received over all of those
ports at the same time.