Protocol Setup (Appletalk) - EFI Pi6500 Pro Configuration Manual

3
3-14 Setting up the Pi6500 Pro from a Windows Computer
T A T
O CONFIGURE PPLE ALK
• Click the Protocol2 tab in the Network Setup window.

Protocol Setup (AppleTalk)

Enable AppleTalk
connected to the Pi6500 Pro. This setting enables the Pi6500 Pro to communicate
over AppleTalk networks.
—The Pi6500 Pro searches the network for AppleTalk zones in your
Select Zone
network segment. Scroll through the list to select the AppleTalk zone in which you
want the Pi6500 Pro to appear. If your segment has only one zone, the Pi6500 Pro is
assigned to that zone automatically.
If no AppleTalk zone can be found, your network may have no defined zones, or else
the network cable has not been connected (see page 5-4). Choose OK.
—Select to enable Apple Talk if you have an AppleTalk network