Ethernet Cable Connection; Back View Of The Pi6500 Pro - EFI Pi6500 Pro Configuration Manual

1
1-12 Connecting to the Network
Power switch
Power connector

Ethernet cable connection

The Pi6500 Pro supports Ethernet cabling of these types:
• Thicknet (thick coaxial Ethernet cable or 10Base5)
Connects directly to the AUI connector on the Ethernet interface of the Pi6500 Pro.
• Unshielded Twisted Pair (UTP), defined as Category 5 for use with 100BaseT or
defined as Category 3 or Category 5 for use with 10BaseT
Uses an 8-pin RJ-45 connector that plugs into the RJ-45 socket on the Pi6500 Pro.
The 100BaseT type supported by the Pi6500 Pro is 100BaseTX, also known as
N :
OTE
Fast Ethernet. If an Ethernet hub is used, it must be a 100BaseTX hub. The term
"100BaseT" is used in this manual to refer to 100BaseTX.

Back view of the Pi6500 Pro

Copier interface connector
RJ45 connector for Ethernet
Token Ring
Parallel connector