Service Setup Options; Pserver Setup (Netware Services); Service Setup (Enable Lpd Printing Service); Service Setup (Enable Port 9100) - EFI Pi6500 Pro Configuration Manual

2
2-22 Setting up the Pi6500 Pro
Exit Service Setup
LPD Setup
PServer Setup
Windows Setup
Service Setup
Web Services Setup
IPP Setup
Port 9100 Setup
Service Setup
Network Setup
Service Setup
LPD Setup

Service Setup options

Network Service Setup has options for TCP/IP and IPX/SPX networks, as well as for
local area Windows printing.
• LPD Setup enables lpd printing on TCP/IP networks.
• For IPX/SPX networks, PServer Setup allows you to enter the names of the Novell
objects that are concerned with Pi6500 Pro print jobs.
• Windows Setup enables the Microsoft SMB protocol, which supports peer to peer
printing, also known as Windows printing.
• Web Services Setup enables the http protocol and, therefore, use of the
Fiery WebTools.
• IPP Setup enables the Internet Printing Protocol.
• Port 9100 Setup allows users to download jobs to a print connection on the
Pi6500 Pro.
PServer is a program in the Pi6500 Pro that services all the Novell print queues
assigned to the Novell print servers you have set up for printing to the Pi6500 Pro.
When you choose PServer Setup and enable PServer, you can set up NDS (Novell
Directory Services), Bindery Services, or both. NDS is used with NetWare 4.x/5.x;
Bindery Services are used with NetWare 3.x or with NetWare 4.x/5.x in bindery
emulation mode.
LPD Setup
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing.