Examples - HP StorageWorks P9000 Reference Manual

Option

Examples

The following examples show how to use the inqraid and system command to display the connection
between special file of STDIN and the actual physical drive of the storage system.
HP-UX system:
# ioscan -fun | grep rdsk | ./inqraid
/dev/rdsk/c0t2d1 -> [HP] CL2-D Ser =
/dev/rdsk/c0t4d0 -> [HP] CL2-D Ser =
Linux and zLinux system:
# ls /dev/sd* | ./inqraid
/dev/sdh -> CHNO =
/dev/sdi -> CHNO =
Solaris system:
# ls /dev/rdsk/* | ./inqraid
/dev/rdsk/c0t2d1 -> [HP] CL2-D Ser =
/dev/rdsk/c0t4d0 -> [HP] CL2-D Ser =
AIX system:
# lsdev -C -c disk | grep hdisk | ./inqraid
hdisk1 -> [SQ] CL2-D Ser =
HORC = P-VOL
RAID5[Group
hdisk2 -> [SQ] CL2-D Ser =
RAID5[Group
Windows system:
Description
STDIN or special files are specified as follows (lines starting with '#' via STDIN are interpreted as
comments):
HP-UX: /dev/rdsk/* or /dev/rdisk/disk*
Solaris: /dev/rdsk/*s2 or c*s2
Linux : /dev/sd... or /dev/rd... ,/dev/raw/raw*.
zLinux: /dev/sd... or /dev/dasd... or /dev/rd... ,/dev/raw/raw*.
AIX: /dev/rhdisk* or /dev/hdisk* or hdisk*
DIGITAL or Tru64: /dev/rrz*c or /dev/rdisk/dsk*c or /dev/cport/scp*
DYNIX: /dev/rdsk/sd* or sd* for only unpartitioned raw device
IRIX64: /dev/rdsk/*vol or /dev/rdsk/node_wwn/*vol/* or /dev/dsk/*vol or
/dev/dsk/node_wwn/*vol/*
OpenVMS: $1$* or DK* or DG* or GK*
Windows NT: hdX-Y, $LETALL, $Phys, D:\DskX\pY, \DskX\pY
Windows: hdX-Y,$LETALL,$Volume,$Phys, D:\Vol(Dms,Dmt,Dmr)X\DskY,
\Vol(Dms,Dmt,Dmr)X\DskY. For further information on LDM volumes for Windows systems, see
Remote Volume Discovery in the User and Reference Guide.
Lines starting with '#' via STDIN are interpreted as comments.
HORC = P-VOL
RAID5[Group
RAID5[Group
0 TID =
[HP] CL2-B Ser =
HORC = P-VOL HOMRCF[MU#0 = SMPL MU#1 = SMPL MU#2 = SMPL]
RAID5[Group 1- 2] SSID = 0x0004 CTGID = 2
0 TID =
[HP] CL2-B Ser =
RAID5[Group 1- 2] SSID = 0x0004
CA = P-VOL BC[MU#0 = SMPL MU#1 = SMPL MU#2 = SMPL]
RAID5[Group
RAID5[Group
30053 LDEV =
HOMRCF[MU#0 = SMPL MU#1 = SMPL MU#2 = SMPL]
2- 1] SSID = 0x0008 CTGID = 3
30053 LDEV =
2- 1] SSID = 0x0008
30053 LDEV =
HOMRCF[MU#0 = SMPL MU#1 = SMPL MU#2 = SMPL]
2- 1] SSID = 0x0008 CTGID = 3
30053 LDEV = 14 [HP
2- 1] SSID = 0x0008
1 LUN = 7
30053 LDEV = 23 [HP
4 LUN = 0
30053 LDEV = 14 [HP
30053 LDEV =
2- 1] SSID = 0x0008 CTGID = 3
30053 LDEV =
2- 1] SSID = 0x0008
9 [HITACHI ] [OPEN-3
14 [HITACHI ] [OPEN-3-CM
9 [HP ] [OPEN-3
] [OPEN-3-CM
] [OPEN-3
] [OPEN-3-CM
9 [HP ] [OPEN-3
14 [HP ] [OPEN-3-CM
]
]
]
]
]
]
]
]
inqraid 1 19