Pool Manager Provider Error Codes - HP StoreEasy 1000 Administrator's Manual

Table 5 Storage Management Provider errors (continued)
Error code Error message
0x21005070 SmartArray.dll file not found.
0x21005071 Raptor.dll file not found.
0x21005072 Failed to get the library name to load.
0x25005073 Failed to release the lock.
0x24005074 Failed to create the mutex.
0x24005075 Failed to get the proxy to the contoller library.
0x25005076 The resiliency setting does not match the pool's
resiliency setting.
0x25005077 The operation was successful but the storage
provider cache is out of date. You must update the
storage provider cache before proceeding further.
0x25005078 The specified friendly name already exists.
0x20005079 The Storage Pool could not complete the operation
because its health or operational status does not
permit it.
0x2500507A One of the physical disks specified is assigned to
other storage pool.
0x2300507B This operation is supported only for spare drives.
0x2000507C The physical drive could not complete the operation
because its health or operational status does not
permit it.
0x2000507D One of the physical disks specified can not be
configured by the subsystem.
0x2300507E The specified pool does not contain witness lun
and hence cannot be shrunk.
0x2300507F This operation is not supported on primordial
storage pools.

Pool Manager Provider error codes

The Pool Manager Provider error codes are listed in
Table 6 Pool Manager Provider errors
Error code
0x20006001
0x20006002
0x20006003
0x20006004
0x20006005
90 Troubleshooting, servicing, and maintenance
Recommended action
Please re-install HP Storage Management Provider.
Please re-install HP Storage Management Provider.
Please re-install HP Storage Management Provider.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please restart HP Storage Management Service.
Please restart HP Storage Management Service.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please retry the operation.
Please retry the operation.
Please retry the operation.
Table 6 (page
Error message
Pool Manager Provider has been unloaded from memory.
The Pool Manager Rule XML file is invalid.
Pool configuration is not supported for this enclosure.
Failed to initialize logger.
Could not find ROM Check Library (pssver.dll), this is required to find pool
template for any enclosure.
90).