Raidvchkscan; Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

Example 7: raidvchkdsp command example with -v aou option
[Display example]
# raidvchkdsp -v aou -g AOU
Group PairVol
AOU AOU_001
AOU AOU_002
Output of the raidvchkdsp command with the -v aou option:
Used(MB): Displays the usage size of the allocated block on this LUN. Range: 0 ≤ Used (MB) <
LU_CAP(MB) + 42 MB
LU_CAP(MB): Displays the LUN capacity responded to the "Readcapacity" command as SCSI
interface.
LU_CAP(BLK): Displays the LUN capacity (in block/512 bytes) responded to the "Readcapacity"
command as SCSI interface.
U(%): Displays the usage rate of the allocated block on the Thin Provisioning pool containing this
LU.
T(%): Displays the threshold rate being set to the Thin Provisioning pool as high-water mark.
PID: Displays the Thin Provisioning pool ID assigned to this Thin Provisioning volume.

raidvchkscan

The raidvchkscan command displays the fibre port of the storage system (XP1024/XP128 Disk
Array and later), target ID, LDEV mapped for LUN#, and the parameters for validation checking,
regardless of the configuration definition file.
Note: This command is rejected with EX_ERPERM by connectivity checking between RAID Manager
and the RAID storage system.

Syntax

raidvchkscan { -h | -q | -z | -I[H][M][instance#] or I[CA][BC][instance#]
| -p <port> [hgrp] | -pd[g] <raw_device> | -s <seq#>
| -t <target> | -l <lun> | [ -f[x] ] | -v <op> }

Options and parameters

Option
-h
-q
-z or -zx
-I[H][M]
[instance#]
or
-I[CA][BC]
[instance#]
-g <group>
86 Replication commands
Port# TID LU
CL2-D 2 7
CL2-D 2 10
Description
Displays Help/Usage and version information.
Terminates the interactive mode and exits the command.
Makes the raidvchkscan command enter the interactive mode. The -zx option guards performing of
the HORCM in the interactive mode. When this option detects a HORCM shutdown, interactive mode
terminates.
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
Specifies a group name written in the configuration definition file.
Seq# LDEV# Used(MB) LU_CAP(MB) U(%) T(%) PID
62500 167 20050
62500 170 110000
1100000 10 70
1100000 10 70
1
1