Portscan; Syntax; Argument; Example - HP StorageWorks P9000 Reference Manual

Raid manager reference guide
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

SSID: Shows the SSID of the specified volume.
CTGID (Continuous Access Asynchronous/Cnt Ac-J only): Shows the consistency group ID of
specified volume.

portscan

The portscan subcommand displays the devices on the specified port(s).

Syntax

-x portscan port#(0-N)

Argument

port#(0-N): Specifies the range of port numbers on the Windows system.

Example

The following shows an example of the portscan subcommand used as an option of the raidscan
command and its output. This example displays the devices for the range of ports from 0 to 20.
portscan subcommand example
raidscan
PORT[ 0] IID [ 7] SCSI Devices
PhId[ 0] TId[
PhId[ 0] TId[
PORT[ 1] IID [ 7] SCSI Devices
PhId[ 0] TId[
PORT[ 2] IID [ 7] SCSI Devices
PhId[ 0] TId[
PhId[ 0] TId[
PhId[ 0] TId[
PhId[ 0] TId[
NOTE:
This example displays the devices for the range of ports from 0 to 20.
Output of the portscan subcommand:
Port: Shows the port number on the device adapter recognized by the Windows system.
IID: Shows the initiator ID on the specified device adapter port.
Phid: Shows the BUS number on the specified device adapter port.
Tid: Shows the target ID of the hard disk(s) on the specified adapter port and bus.
LUN: Shows the LU number of each hard disk on the specified device adapter port/bus. This item
shows LDEV# of the partner who becomes a pair in or among the RAID storage system.

sync, syncd

The sync (synchronization) subcommand sends unwritten data remaining on the Windows server
to the specified device(s) to synchronize the pair(s) before the RAID Manager command is executed.
The syncd (synchronization delay) subcommand waits for the delayed IO for dismount after issued
"sync."
The term dismount refers to when the NTFS file system treats a locked volume as a dismounted
volume. For example, locking the volume from further IO.
108 Subcommands
-x
portscan
port0,20
3] Lun[
4] Lun[
0] Lun[
5] Lun[
5] Lun[
5] Lun[
6] Lun[
0]
[MATSHIT] [CD-ROM CR-508
0]
[HP
] [C1537A
0]
[HITACHI ] [DK328H-43WS
0]
[HITACHI ] [OPEN-3
1]
[HITACHI ] [OPEN-3
2]
[HITACHI ] [OPEN-3
0]
[HITACHI ] [3390-3A
] ...Claimed
] ...Claimed
] ...Claimed
] ...Claimed
] ...Claimed
] ...Claimed
] ...Claimed

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp p9500Storageworks p9500

Table of Contents