Paircurchk - HP StorageWorks P9000 Reference Manual

Raid manager reference guide
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

% (Continuous Access Synchronous only) = Copy operation completion, or percent pair
synchronization.
Vol.
COPY
Continuous Access
Asynchronous
P-VOL
CR
S-VOL
-
Volume
P-VOL
S-VOL
CR: Shows the copy operation rate (identical rate of a pair).
BMP: Shows the identical percentage of BITMAP both P-VOL and S-VOL.
SF: Shows sidefile percentage of each CT group as sidefile 100% on cache of both P-VOL and S-VOL. Following is
an arithmetic expression using the high water mark (HWM) as 100% of a sidefile space:
HWM(%) = HWM(%)/Sidefile space (30 to 70) × 100
JF: Shows the usage rate of the current journal data as 100% of the journal data space.
P-LDEV# = LDEV number of the partner volume of the pair
M
For P-VOL and "PSUS" state:
M="W" shows that S-VOL is suspending with R/W enabled through the pairsplit.
M="-" shows that S-VOL is suspending with Read only through the pairsplit.
For S-VOL and "SSUS" state:
M="W" shows that S-VOL has been altered since entering SSUS state.
M="-" shows that S-VOL has NOT been altered since entering SSUS state.
For "COPY/RCPY/PAIR/PSUE" state:
M="N" shows that its volume are Read-disabled through the paircreate '-m noread'.

paircurchk

The paircurchk command is used to check the currency of the Continuous Access Synchronous
secondary volume(s) by evaluating the data consistency based on pair status and fence level.
The following table specifies the data consistency for each possible state of a Continuous Access
Synchronous volume. A paired volume or group can be specified as the target of the paircurchk
command. The paircurchk command assumes that the target is an S-VOL. If the paircurchk command
is specified for a group, the data consistency of each volume in the group is checked, and all
inconsistent volumes are found in the execution log file and displayed. Paircurchk is also executed
as part of the Continuous Access Synchronous takeover (horctakeover) command.
PAIR
OTHER
COPY
Continuous Access
Synchronous Sync status
SF
BMP
CR
SF
BMP
-
COPY
PAIR
Continuous Access Journal status
CR
JF
-
JF
PAIR
OTHER
COPY
Business Copy status
BMP
BMP
CR
BMP
BMP
CR
PSUS/SSUS (PJNS/SJNS)
JF
JF
PAIR
P-VOL_PSUS
OTHER
S-VOL_COPY
CR
BMP
CR
CR
CR
CR
OTHER
BMP
BMP
paircurchk
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp p9500Storageworks p9500

Table of Contents