HP StorageWorks P9000 Reference Manual page 70

Option
-find verify
[MU#]
70 Replication commands
Description
Verifies the relation between Group on the configuration definition file and Device_File registered
to the LDEV map tables, based on the Device File name (raw device file provided via STDIN). This
option can be used with "-fx" and "-fd" options. This option is affected by the command execution
environment (HORCC_MRCF).
# ioscan -fun | grep rdsk | raidscan -find verify
DEVICE_FILE Group PairVol PORT TARG LUN M SERIAL LDEV
/dev/rdsk/c0t3d0 oradb oradev1 CL1-D 3 0 0 35013 17
/dev/rdsk/c0t3d1 oradb oradev2 CL1-D 3 1 0 35013 18
/dev/rdsk/c0t3d2 - - - - - 0 35013 19
# ioscan -fun | grep rdsk | raidscan -find verify 1 -fd
DEVICE_FILE Group PairVol Device_File M SERIAL LDEV
/dev/rdsk/c0t3d0 oradb oradev1 c0t3d0 1 35013 17
/dev/rdsk/c0t3d1 oradb oradev2 Unknowm 1 35013 18
/dev/rdsk/c0t3d2 - - - 1 35013 19
NOTE:
If the device name is different between DEVICE_FILE and Device_File, then it shows shared LDEV
among multiple device files.
Group: This displays the group name (dev_group) defined in the configuration definition file.
PairVol: This displays the paired volume name (dev_name) within the group defined in the
configuration definition file.
PORT: This displays the port number (port#) defined in the configuration definition file.
TARG: This displays the targetID (TargetID) defined in the configuration definition file.
LUN: This displays the LUN (LU#) defined in the configuration definition file.
M: This displays the MUN (MU#) defined in the configuration definition file. MU# for Continuous
Access Synchronous are shown as "-", and MU# for Business Copy/Snapshot are shown as "0",
"1", "2".
Device_File: This displays Device_File which is registered to the LDEV map tables into the RAID
Manager.
SERIAL: This displays the production (serial#) number of the RAID storage system.
LDEV: This displays the LDEV# within the RAID storage system.