HP StorageWorks P9000 Reference Manual page 191

The tier information of the pool for Smart Tiers is displayed. For details about each parameter, see
the manual HP StorageWorks P9000 Provisioning for Open Systems User Guide.
# raidcom get thp_pool -key opt
PID POLS MODE STS DAT TNO TL_RANGE TD_RANGE TU_CAP(MB) TT_CAP(MB) T(%) P(%) R(%)
001 POLN MAN STP VAL 1 00005000
001 POLN MAN STP VAL 2 00003000
001 POLN MAN STP VAL 3 00002000
002 POLF AUT MON PND 1
Description on each column in output example
PID
This displays the Thin Provisioning/Smart Tiers pool ID.
POLS
This displays the following status of the pool.
- POLN: "Pool Normal" (The pool is in the normal status.)
- POLF: "Pool Full" (The pool is in the overflow status exceeding the threshold.)
- POLS: "Pool Suspend" (The pool is in the overflow status exceeding the threshold and is suspended.)
- POLE: "Pool failure" (The pool is suspended in the failure status.) In this status, the pool information
cannot be displayed.
MODE
This displays the execution mode.
DEF: The mode in which the start/termination of the monitor is performed by the instruction of the
CLI, and the Tier range setting is performed by the automatic calculation of the DKC.
AUT: The mode in which the start/termination of the monitor is performed by time specification
and the Tier range setting is performed by the automatic calculation of the DKC.
Note: AUT cannot be instructed from the CLI. Only performed if displayed when set from the SN2.
STS
This displays the operational status of the performance monitor and the tier reallocation.
STP: The performance monitor and the tier reallocation are stopped.
RLC: The performance monitor is stopped. The tier reallocation is operating.
MON: The performance monitor is operating. The tier reallocation is stopped.
RLM: The performance monitor and the tier reallocation are operating.
DAT
This displays the status of the monitor information.
VAL: Valid.
INV: Invalid.
PND: Being calculated.
TNO
Tier range number
TL_RANGE[IOPH]
Lower limit value (Hexadecimal) of the Tier
TD_RANGE[IOPH]
Delta value (Hexadecimal) of the Tier
TU_CAP(MB)
Tier capacity (Usage amount)
00003000 200000 1000000 80
00002000 400000 1000000 80
00002000 600000 1000000 80
- - 500000 1000000 80
54 98
54 98
54 98
54 100
raidcom get thp_pool 191