Syntax; Options And Parameters; Examples - HP StorageWorks P9000 Reference Manual

Syntax

raidcom get thp_pool [ -key <keyword>]

Options and parameters

Option
[ -key <keyword> ]

Examples

Displaying the pool information of the pool for Thin Provisioning/Smart Tiers.
# raidcom get thp_pool
PID POLS U(%)
001 10
002 POLF
004 POLN
Description on each column in output example
PID
This displays the Thin Provisioning/Smart Tiers pool ID.
POLS
This displays the following status of the pool.
- POLN: "Pool Normal" (The pool is in the normal status.)
- POLF: "Pool Full" (The pool is in the overflow status exceeding the threshold.)
- POLS: "Pool Suspend" (The pool is in the overflow status exceeding the threshold and is suspended.)
- POLE: "Pool failure" (The pool is suspended in the failure status.) In this status, the pool information
cannot be displayed.
U(%)
This displays the usage rate of the pool.
AV_CAP(MB)
This displays the available capacity for the Thin Provisioning/Smart Tiers volumes mapped to this
pool.
TP_CAP(MB)
This displays the total capacity of the pool.
W(%)
This displays the threshold value for "WARNING" set for the pool.
H(%)
This displays the threshold value set for the pool as high water mark.
Num
This displays the number of LDEVs configuring the pool.
LDEV#
This displays the first number of the LDEV configuring the pool.
LCNT
This displays the total number of Thin Provisioning/Smart Tiers volumes mapped to the pool.
TL_CAP(MB)
This displays the total capacity of all Thin Provisioning volumes mapped to the pool.
190 Configuration setting commands
Description
Specifies a display keyword. Specify opt as <keyword>.
AV_CAP(MB) TP_CAP(MB) W(%) H(%) Num LDEV#
45000000 50000000
95 10000 100000000
0 10000000 100000000
50 80 2 265
50 80 3
80 90 2
LCNT TL_CAP(MB)
33 65000000
270 900 100000000
280 0 200000000