Examples - HP StorageWorks P9000 Reference Manual

Examples

Displaying journal information.
# raidcom get journal
JID MU CTG JNLS AP U(%) Q-Marker Q-CNT D-SZ(BLK) Seq# Num LDEV#
001 0 1 PJNN 4 21 43216fde 30 512345 62500 4 265
002 1 2 PJNF 4 95 3459fd43 52000 512345 62500 3 270
002 2 2 SJNS 4 95 3459fd43 52000 512345 62500 3 270
003 0 3 PJSN 4 0 - - 512345 62500 1 275
004 0 4 PJSF 4 45 1234f432 78 512345 62500 1 276
005 0 5 PJSE 0 0 - - 512345 62500 1 277
Displaying Timer related information of the journal.
# raidcom get journalt
JID MU CTG JNLS AP U(%) Q-Marker Q-CNT D-SZ(BLK) Seq# DOW PBW APW
001 0 1 PJNN 4 21 43216fde 30 512345 63528 20 300 40
002 1 2 PJNF 4 95 3459fd43 52000 512345 63528 20 300 40
003 0 3 PJSN 4 0 - - 512345 63528 20 300 40
Displaying option information of the journal.
# raidcom get journal -key opt
# raidcom get jnl_grpt -pkey opt
JID MU CTG JNLS TYPE TTYPE MODE IF DOW(S) PBW(M) CR CS(bps) DM MP# Seq#
001 0 1 PJNN OPEN - HDD E 30 5 M 256 Y 2 64034
002 1 2 PJNF M/F system CACHE D 30 5 H 256 Y 2 64034
Description on each column in output example
JID
This displays the journal number.
MU
This displays the mirror ID on Cnt Ac-J.
CTG
This displays the consistency group number.
JNLS
This displays the following status in the journal.
- SMPL: this means the journal volume which does not have a pair, or deleting.
- P(S)JNN: this means "P(S)vol Journal Normal Normal".
- P(S)JNS this means "P(S)vol Journal Normal Suspend" created with -nocsus option.
- P(S)JSN: this means "P(S)vol Journal Suspend Normal".
- PJNF: this means "P(S)vol Journal Normal Full".
- P(S)JSF: this means "P(S)vol Journal Suspend Full".
- P(S)JSE: this means "P(S)vol Journal Suspend Error" including link failure.
- P(S)JES this means "P(S)vol Journal Error Suspend" created with -nocsus option.
AP
It shows the number of active link paths of Cnt Ac-J.
U(%)
It shows the usage rate of journal volumes assuming the entire relevant volume is 100%.
Q-Marker
The P-VOL journal volume Shows the newest sequential number (Q-marker) at the time of receiving
WRITE data. The S-VOL journal volume shows the newest sequential number (Q-marker) written to
the cache.
Q-CNT
148 Configuration setting commands