HP StorageWorks P9000 Reference Manual page 15

Table 5 Configuration setting commands (continued)
Command
raidcom get host_grp
raidcom add hba_wwn
raidcom delete hba_wwn
raidcom get hba_wwn
raidcom add lun
raidcom delete lun
raidcom get lun
raidcom modify port
raidcom get port
raidcom get ldev
raidcom extend ldev
raidcom add ldev
raidcom delete ldev
raidcom get parity_grp
raidcom get external_grp
raidcom modify ldev
raidcom initialize ldev
raidcom discover external_storage
raidcom discover lun
raidcom add external_grp
raidcom delete external_grp
raidcom modify external_grp
raidcom check_ext_storage external_grp
raidcom disconnect external_grp
raidcom add path
raidcom delete path
raidcom check_ext_storage path
raidcom disconnect path
raidcom get path
raidcom get rcu
raidcom add rcu
raidcom delete rcu
raidcom modify rcu
raidcom add rcu_path
Description
Displays the host group information.
Registers a host to a host group.
Deletes a host (WWN) from a host group.
Displays WWN information of a registered host bus adapter.
Sets the LU paths.
Deletes a LU path on the host group of the specified port.
Displays LU path information.
Sets a port.
Displays port information.
Displays LDEV information.
Extends the virtual volume capacity of Thin Provisioning/Smart
Tiers V-VOL.
Creates LDEV or V-VOL.
Deletes LDEV or V-VOL.
Displays a parity group information.
Displays the external volume information that is already
registered.
Changes the attribute of an LDEV.
Formats an LDEV.
Searchs the external storage information.
Searchs the external volume information.
Maps an external volume.
Unmaps an external volume.
Changes the attribute of an external volume.
Checks the connection for an external volume and restarts using.
Disconnects the connection for an external volume.
Adds an external path for External Storage to the existed path
group.
Deletes an external path for External Storage.
Recovers a path for the external volume.
Stops a path for the external volume.
Displays an external path for External Storage.
Displays RCU information.
Registers an RCU.
Deletes an RCU.
Sets an attribute of RCU.
Add a logical path of RCU.
Command summary 15