Drive Monitor (From 2000H); External Interfaces (From 2400H) - HP LTO Ultrium Technical Reference Manual

Code
1C18h
1C19h
1C1Ah
1C1Bh
1C1Ch
1C1Dh
1C1Eh
1C1Fh
1C20h
1C21h
1C22h
1C23h

Drive monitor (from 2000h)

Code
2000h
2001h

External interfaces (from 2400h)

Code
2400h
2401h
2402h
2403h
2404h
2405h
2406h
2407h
88 Drive error codes
Description
Expected a cleaning cartridge but got something else on load.
Cartridge Memory is unusable and failed to read the FID.
Firmware upgrade image information is unavailable.
Could not find firmware information in the new image.
A tape load has failed.
The EOD Validity field is not Good.
Firmware image is not compatible with drive sub-personality configuration.
A TMR timer fired but the ID does not match what was expected.
Firmware image has incorrect signature.
The firmware upgrade image is too old.
Firmware upgrade image version is too large.
Unknown tape format encountered during firmware upgrade.
Description
No error. Synonymous with GOOD status.
Invalid parameter. The value of a parameter received with a Drive Monitor operation falls
outside its valid range.
Description
Command holder full.
Bad command handle.
Empty command handle.
No tape loaded.
Already loaded.
In diagnostic mode.
Not in diagnostic mode.
Tried to write to write protected cartridge.