Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

Syntax

horctakeoff | -h | -q | -z | -I[H][M][instance#] or I[CA][BC][instance#]
| -g[s] <group> | -d[s] <pair Vol> | -d[g][s] <raw_device> [MU#]
| -d[g][s] <seq#> <LDEV#> [MU#] | -jp <id> | -js <id>
| [-t

Options and parameters

Option
-h
-q
-z or -zx
-I[H][M]
[instance#]
or
-I[CA][BC]
[instance#]
-g[s] <group>
-d[s] <pair Vol>
-d[g][s]
<raw_device>
[MU#]
-d[g][s] <seq#>
<LDEV#> [MU#]
-jp <id>
(HORC/Cnt Ac-J
only)
-js
<id>(HORC/Cnt
Ac-J only)
-t <timeout>
-noms
<timeout> ]| -nomsg }
Description
Displays Help/Usage and version information.
Terminates the interactive mode and exits the command.
Makes the raidvchkdsp command enter the interactive mode. The -zx option guards performing of
the HORCM in the interactive mode. When this option detects a HORCM shutdown, interactive mode
terminates.
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
This option is used when specifying a group name (defined in the configuration definition file). The
command is executed for the specified group unless the -d <pair Vol> option shown below is specified.
This option is used to specify a logical (named) volume (defined in the configuration definition file).
When this option is specified, the command is executed for the specified paired logical volume.
This option searches the RM configuration file (local instance) for a volume that matches the specified
raw device. If a volume is found, the command is executed on the paired volume (-d) or group
(-dg).This option is effective without specification of the "-g <group>" option. If the specified
raw_device is listed in multiple device groups, this will apply to the first one encountered.
This option searches the RM instance configuration file (local instance) for a volume that matches the
specified sequence # and LDEV. If a volume is found, the command is executed on the paired logical
volume (-d) or group (-dg).This option is effective without specification of the "-g <group>" option.
If the specified LDEV is listed in multiple device groups, this will apply to the first one encountered.
<seq #> <LDEV #> can be specified in a hexadecimal (by addition of "0x ") or decimal.
Horctakeoff command can change 3DC configuration from 3 DC multi-target to 3 DC multi-hop.In
order to create 3 DC multi-hop (CA_Sync to CA_Sync/Cnt Ac-J_P-VOL to Cnt Ac-J), it will be needed
to specify a journal ID for Cnt Ac-J_P-VOL. So this option is used for that purpose. If this option will
not be specified, a journal ID for Cnt Ac-J_P-VOL used for 3 DC multi-target will be inherited
automatically.
Horctakeoff command can be changed 3DC configuration from 3 DC multi-target to 3 DC multi-hop.In
order to create 3 DC multi-hop (CA_Sync to CA_Sync/Cnt Ac-J to Cnt Ac-J_S-VOL), it will be needed
to specify a journal ID for Cnt Ac-J_S-VOL. So this option is used for that purpose. If this option will
not be specified, a journal ID for Cnt Ac-J_S-VOL used with 3 DC multi-target will be inherited
automatically. The CTGID will also be inherited automatically for the internal paircreate command.
The -t <timeout> option specifies the maximum time to wait for the Sync_P-VOL to Sync_S-VOL delta
data re-synchronizing operation. It is used for the internal pairresync command with the time-out
period in units of seconds. If this option will not be specified, the default timeout value (7200 sec)
is used.
This option is used to suppress messages when this command is executed from a user program. This
option must be specified at the beginning of the command arguments.
horctakeoff 99