HP StorageWorks P9000 Reference Manual page 125

127.0.0.1 52323
HORCM_CMD
#dev_name dev_name
#UnitID 0 (Serial# 61456)
/dev/rdsk/c23t3d0
mkconf command tool example 2 (HP-UX)
HORCM_DEV
#dev_group dev_name
# /dev/rdsk/c23t0d0 SER =
ORA ORA_000
# /dev/rdsk/c23t0d1 SER =
ORA ORA_001
# /dev/rdsk/c23t0d2 SER =
ORA ORA_002
# /dev/rdsk/c23t0d3 SER =
ORA ORA_003
# /dev/rdsk/c23t0d4 SER =
ORA ORA_004
# /dev/rdsk/c23t0d5 SER =
ORA ORA_005
# /dev/rdsk/c23t0d6 SER =
ORA ORA_006
# ERROR [CMDDEV] /dev/rdsk/c23t0d7
HORCM_INST
#dev_group ip_address
ORA 127.0.0.1
Notes on mkconf:
A unitID is added to the Serial# order. If two or more command devices exist in the storage system,
then this option selects the multiple device files linked to a command device (an LDEV).
If the target device is the command device, then the target device is suppressed as comment as
shown below:
# ERROR [CMDDEV] /dev/rdsk/c23t0d7 SER = 61456 LDEV = 259 [ OPEN-3-CM
]
If the target device has shared an LDEV among multiple device files and an LDEV is displayed by
another target device already, then its target device is suppressed as comment as shown below:
# ERROR [LDEV LINK] /dev/rdsk/c24t0d3 SER = 61456 LDEV = 195 [FIBRE
FCTBL = 4]
If the target device does not have a valid MU#, then its target device is suppressed as a comment
as shown below:
# ERROR [INVALID MUN (2 < 1)] /dev/rdsk/c24t0d3 SER = 61456 LDEV = 195
[ OPEN-3 ]
If the target device is mixed with a different RAID TYPE, then its target device is suppressed as a
comment as shown below:
# ERROR [MIXING RAID TYPE] /dev/rdsk/c24t0d3 SER = 61456 LDEV = 195 [
OPEN-3 ]
1000
dev_name
port# TargetID
61456 LDEV = 192 [ FIBRE FCTBL = 4 ]
CL2-J 0
61456 LDEV = 193 [ FIBRE FCTBL = 4 ]
CL2-J 0
61456 LDEV = 194 [ FIBRE FCTBL = 4 ]
CL2-J 0
61456 LDEV = 195 [ FIBRE FCTBL = 4 ]
CL2-J 0
61456 LDEV = 256 [ FIBRE FCTBL = 4 ]
CL2-J 0
61456 LDEV = 257 [ FIBRE FCTBL = 4 ]
CL2-J 0
61456 LDEV = 258 [ FIBRE FCTBL = 4 ]
CL2-J 0
SER = 61456 LDEV = 259 [ OPEN-3-CM ]
service
52323
3000
LU# MU#
0 0
1 0
2 0
3 0
4 0
5 0
6 0
<=See Notes.
<=Check and update as needed.
mkconf 125