Pool Manager Provider Error Codes - HP StoreEasy 1000 Storage Administrator's Manual

Table 5 Storage Management Provider errors (continued)
Error code Error message
0x2300507B This operation is supported only for spare drives.
0x2000507C The physical drive could not complete the operation
because its health or operational status does not
permit it.
0x2000507D One of the physical disks specified can not be
configured by the subsystem.
0x2300507E The specified pool does not contain witness lun
and hence cannot be shrunk.
0x2300507F This operation is not supported on primordial
storage pools.

Pool Manager Provider error codes

The Pool Manager Provider error codes are listed in
Table 6 Pool Manager Provider errors
Error code
0x20006001
0x20006002
0x20006003
0x20006004
0x20006005
0x20006006
0x20006007
0x20006008
0x20006009
0x2000600A
0x2000600B
0x2000600C
0x2000600D
0x2000600E
0x2000600F
0x20006010
0x2000601 1
0x20006012
0x20006013
0x20006014
Recommended action
Please retry the operation.
Please retry the operation.
Please retry the operation.
Table 6 (page
Error message
Pool Manager Provider has been unloaded from memory.
The Pool Manager Rule XML file is invalid.
Pool configuration is not supported for this enclosure.
Failed to initialize logger.
Could not find ROM Check Library (pssver.dll), this is required to find pool
template for any enclosure.
Failed to use WMI to call the SMP Provider.
Failed to connect to the SMP Provider.
General WMI error in the Pool Manager Provider.
The first healthy disk size within the virtual enclosure exceeded the maximum drive
capacity allowed for a pool by the virtual enclosure.
The proposed spare disk slot is empty.
The first healthy disk type within the virtual enclosure does not match the disk type
supported by the virtual enclosure.
An empty disk slot was found.
The OS pool was not found in the expected location.
The proposed spare disk is unhealthy.
The proposed spare disk in already in use.
The existing pool type does not match the virtual enclosure type.
The proposed pool cannot be created or grown because one of the concrete
pools within the pool set cannot be grown.
The existing pool contains disks of different sizes or types.
The existing pool has a RAID level that is not supported for the proposed pool.
The global spare used by this existing pool is not in the current virtual enclosure.
97).
Error codes 97