HP StorageWorks P9000 Reference Manual page 117

Option Description
-fp Shows a data protection volume with "-CLI" option by appending '*' to the device file name. If the
-fp option is specified, the data protection volume is a Database Validator volume. If the -fl option
or
is specified, the data protection volume is a Data Retention (Open LDEV Guard on XP1024/XP128
-fl
Disk Array) volume. If the -pin option is specified, shows that the volume is PIN track volume because
of HDD double drive failure and/or external connection disks failure especially.
or
# ls /dev/rdsk/c57t4* | ./inqraid -CLI -fp DEVICE_FILE PORT SERIAL LDEV
-pin
CTG H/M/12 SSID R:Group PRODUCT_ID c57t4d0* CL1-D 62496 32 - s/P/ss 0004
5:01-03 OPEN-3 c57t4d3* CL1-D 62496 35 - s/P/ss 0004 5:01-03 OPEN-3
c57t4d4 CL1-D 62496 36 - s/P/ss 0004 5:01-01 OPEN-3 c57t4d5 CL1-D 62496
37 - s/P/ss 0004 5:01-02 OPEN-3
This example shows that c57t4d0 and c57t4d3 (marked by *) are set to enable Database Validator
checking (-fp option). The raidvchkset command is used to enable/disable volume protection.
-fg (XP1024/XP128 Disk Array and later): Shows a LUN on the host view by finding a host group
for (XP1024/XP128 Disk Array and later).
-fw: Displays all of the cascading volume statuses on the STD Inquiry Page. If this option is not
specified, then only four cascading mirrors are displayed.
Example: # ls /dev/rdsk/* | inqraid -CLI -fw
DEVICE_FILE PORT SERIAL LDEV CTG H../M/.. SSID R:Group PRODUCT_ID
c1t2d10s2 CL2-D 62500 266 - Psss/P/PP----------- 0005 1:01-02 OPEN-3
c1t2d1 1s2 CL2-D 62500 267 - ssss/P/PP----------- 0005 1:01-02 OPEN-3
-CLIB -sort This option is used to know how much pair is possible to create the paired volume on the actual
array, and calculates the total Bitmap page for HORC/HOMRCF and the unused Bitmap page by
sorting the specified special file (the standard input or the argument) with Serial#,LDEV# order.
The default is HOMRCF. This option is valid within "-sort" option.
NOTE:
page (LDEVs shared by multiple ports are calculated as one LDEV).
Also, a command device is excepted from the total.
Example:
# ls /dev/rdsk/* | inqraid -sort -CLIB
DEVICE_FILE PORT SERIAL LDEV SL CL +BC/BC UNUSED PRODUCT_ID
c1t0d0 CL1-E 63516 0 0 0 - - OPEN-9-CM
c1t0d1 CL1-E 63516 12288 0 0 1 30718 OPEN-3
c1t0d2 CL1-E 63516 12403 0 0 4 30718 OPEN-9
c1t0d3 CL1-E 63516 12405 0 0 9 30718 OPEN-E
c1t0d4 CL1-E 63516 12800 0 0 12 30718 OPEN-8
c1t0d5 CL1-E 63516 12801 0 0 18 30718 OPEN-8*2
c1t0d6 CL1-E 63516 13057 0 0 31 30718 OPEN-L
c2t0d6 CL2-E 63516 13057 0 0 31 30718 OPEN-L
An identical LDEV which was sorted in Serial#, LDEV# is accepted to calculate the Bitmap
inqraid 1 17