Ldev Information - HP XP20000/XP24000 User Manual

Item
Contact
Device Location
Firmware Version
Device View

LDEV Information

LDEV Information, on the lower part of the Identity window (see
information about the LDEV. If you have logged in as a storage partition administrator, information
about the allocated SLPR is displayed instead of for the whole storage system.
Description
Contact information such as personnel and telephone number where you can inquire
about the connected storage system. The Remote Web Console user can change the
contact information with Modify mode.
Enter the contact information using up to 180 alphanumeric characters (ASCII codes),
except for some symbols, such as ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, and %. You can also
use a space, except for before and after the contact information. If you enter a space
before or after the contact information, an error occurs when you click Apply. The contact
name is required to use SNMP Agent. For detailed information on SNMP, see the HP
StorageWorks XP24000/XP20000 SNMP Agent Reference Guide.
Make sure to document the contact name because the settings will be cleared when the
SVP is replaced.
Location of the connected storage system. The Remote Web Console user can change
the device location with Modify mode.
Enter a device location using up to 180 alphanumeric characters (ASCII codes), except
for some symbols, such as ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, and %. You can also use
a space, except for before and after the location. If you enter a space before or after
the location, an error occurs when you click Apply. The device location is required to
use SNMP Agent. For detailed information on SNMP, see the HP StorageWorks
XP24000/XP20000 SNMP Agent Reference Guide.
Make sure to document the device location because the settings will be cleared when
the SVP is replaced.
Provides the firmware version information for the connected storage system:
Main: Version of the microcode installed in the connected storage system.
SVP: Version of the Remote Web Console Java application installed in the SVP of the
connected storage system.
Server: Version of the RMI server installed in the SVP of the connected storage system.
Product name and visual image (picture) of the connected storage system.
Figure 29 (page 64)), provides
Identity Window 63