Removing A Processor And Heatsink - HP D5970A - NetServer - LCII User Manual

Chapter 6

Removing a Processor and Heatsink

Use this procedure to remove a processor and its heatsink (the heatsink must be
removed before the processor).
CAUTION Take the following precautions when removing processors:
• Wear an anti-static wrist strap and use a static-dissipating
• Before removing the processor, touch a grounded
1. Remove the air flow guide. See Chapter 2, "Opening and Closing the HP
Netserver."
2. Use a flathead screwdriver or similar tool to unhook the tool latch on the
heatsink. See Figure 6-6.
Figure 6-6. Removing the Heatsink
58
work surface or grounding mat connected to the chassis
when handling components.
unpainted metal surface on the HP Netserver to discharge
static electricity.
Installing an Additional Processor
Tool
Latch