Removing A Processor And Heatsink - HP LP 1000r Service Manual

Chapter 6

Removing a Processor and Heatsink

Use this procedure to remove a processor and its heatsink. The heatsink must be removed, before removing
the processor.
CAUTION
88
Tool
Latch
Always wear a wrist-strap and use a static-dissipating work surface connected to the
chassis when handling components. Ensure the metal of the wrist strap contacts
your skin.
Before you touch the processor to remove it, touch a grounded unpainted metal
surface on the HP Netserver to discharge static electricity.
Hold
Down
Hook
Latch
Setting the Latches
Replacing the Air Duct
Replacing Parts