HP D5970A - NetServer - LCII User Manual page 11

Chapter 1
Power Mouse Parallel
Keyboard
Table 1-3. Rear Panel LED Indicators
Indicator Definition
Power Supply Each power supply module has a status LED:
LED
• Steady Green indicates the power supply module is powered
up and operating normally.
• Flashing Green indicates that AC current is present and the
power supply module is in standby mode (HP Netserver is
powered off).
• Steady Amber may indicate a power module failure, a system
over-current condition, a blown fuse in the power supply
module or cage, or that no AC is present.
• Off indicates the AC line cord is unplugged from all installed
power modules.
This LED is the activity/link indicator:
Link LED
• Steady Green indicates a valid LAN link.
• Flashing Green indicates there is LAN activity.
LAN Speed This LED is the LAN speed indicator:
LED
• Steady Amber shows LAN is operating at 100 Mbps LAN
speed.
• Off shows LAN is operating at 10 Mbps LAN speed.
LAN
A/MGMT
Video
Serial
A/MGMT
Figure 1-3. Rear Panel and Ports
Controls, Ports and Indicators
PCI Slot (1)
LAN B
External
SCSI Connector
5