Rack Mounting The Hp Netserver (2-Post); Introduction - HP D5970A - NetServer - LCII User Manual

8 Rack Mounting the HP Netserver
(2-Post)

Introduction

This chapter provides instructions for mounting the HP Netserver in a two-post
non-HP rack. The illustration below shows the characteristics of the 2-post
(CPI – Chatsworth Products Inc.) rack.
If you have the 4-post HP System/E or System/U rack, or a third-party 4-post rack,
see Chapter 7, "Rack Mounting the HP Netserver (4-Post)," for instructions.
If you have the older 4-post HP systems rack, see Chapter 13, "Alternative Rack
Mounting." If you want to install the HP Netserver in a third-party rack not
covered in this guide, you may find relevant documentation on HP's web site at the
following URL:
http://www.hp.com/netserver/support
75