Installing An Accessory Board - HP D5970A - NetServer - LCII User Manual

Chapter 5
Integrated
RA Board
2
I C
Connector
Figure 5-2. Integrated RA Board Location

Installing an Accessory Board

Use this procedure to install the accessory board.
NOTE
For information about a specific PCI board type, refer to the
Readme file, Tested Products List, or Configuration Advisor
on your HP Netserver Navigator CD-ROM.
1. Log off all users and, if necessary, back up files.
For detailed instructions, see "Powering Down the HP Netserver," in
Chapter 1, "Controls, Ports and Indicators."
42
Installing Additional Boards