Cabling Rack Components - HP D5970A - NetServer - LCII User Manual

Chapter 13
Figure 13-8. Attaching the Bezel to the HP Netserver

Cabling Rack Components

After installing the HP Netserver in the rack, refer to the white paper entitled HP
Netserver High Density Rack Solutions Overview (LP 1000r and LP 2000r) to
cable the components in the rack enclosure. The white paper is available on HP's
web site at the following URL:
http://www.hp.com/netserver/support
After cables are attached to rack components you can attach the Cable
Management Arm, as described in the next section.
126
Pin
Alternative Rack Mounting (4–Post)
Pin
A
B