HP D5970A - NetServer - LCII User Manual page 40

Chapter 4
Figure 4-2. DIMM Locations on System Board
7. Spread the two retaining latches on the slot outward. See Figure 4-3.
8. Remove a DIMM from its container, handling the module by its edges.
•
CAUTION
•
•
34
System Board (top view)
Leave the memory module in the anti-static container until
you are ready to install it.
Always use an anti-static wrist strap and a grounding mat.
Before removing a DIMM from the anti-static container,
touch a grounded, unpainted metal surface to discharge
static electricity.
Installing Additional Memory
0
DIMM
1
Slots
2
3