Marking The Columns - HP D5970A - NetServer - LCII User Manual

Chapter 13

Marking the Columns

To make it easier to install the slides in the rack, you may want to mark the
columns to indicate the server placement. Use the HP Rack Configuration Tools to
determine where in the rack to mount the HP Netserver. The tools are available at
the following URL:
http://www.hp.com/netserver/support
Use a marking pen or masking tape to mark the server position on the inside of the
front and rear columns, as shown in Figure 13-2.
The slides will use the second column hole, counting from the base of the
HP Netserver.
Inside Face of Column
Masking
Bottom of
Tape or
HP Netserver
Marker
Figure 13-2. Marking Server Placement
Alternative Rack Mounting (4–Post)
Rear of
Rack
Mark this face of
Left the columns with
Side masking tape
or marker pen.
Front of
Rack
Right
Side
119