HP D5970A - NetServer - LCII User Manual page 136

Hp netserver lp 2000r (1.13, 1.26 & 1.40 ghz) user guide
Hide thumbs Also See for D5970A - NetServer - LCII:
Table of Contents

Advertisement

Appendix A
Table A-2. Environmental Requirements
Parameter
Temperature
Operating
Non-operating
Humidity
Operating
Non-operating
Altitude
Operating
Non-operating
Thermal Output
Maximum
Operating
NOTE
The specifications and requirements listed above can vary if
you install a mass storage device in the HP Netserver that has
more stringent environmental limits than required for the
Netserver. Ensure the operating environment for any mass
storage devices you intend to install are compatible with the
Netserver's environmental requirements.
130
Conditions
5° to 35° C (41° to 95° F)
NOTE
°
°
• Subtract 1
C (2
F) from the maximum
temperature for each 609m (2,000 ft.) gain
above sea level
°
°
• Subtract 3
C (5
F) from the maximum
temperature if unit is installed in non-HP
enclosed cabinet
-40° to +65° C (-40° to +149° F)
20% to 80% relative humidity,
non-condensing
5% to 95% relative humidity,
non-condensing
-30 to 3,045 m (10,000 ft)
-30 to 12,180 m (40,000 ft)
1,365 BTU/hr
Specifications

Advertisement

Table of Contents
loading

Table of Contents