Attaching The Cable Management Arm - HP D5970A - NetServer - LCII User Manual

Chapter 7

Attaching the Cable Management Arm

The Cable Management Arm (CMA) allows the cables and power cord to move in
and out with the HP Netserver chassis without being accidentally disconnected.
The Cable Management Arm installation is tool-less.
1. Ensure the HP Netserver is pushed all the way into the rack.
2. Attach the Cable Management Arm to the rack:
a. Mount the outer flange of the Cable Management Arm on the pins on the
left slide rear bracket.
b. Tighten the thumbscrew on the flange to secure the Cable Management
Arm to the rack. See the example in Figure 7-8.
Figure 7-8. Attaching the Cable Management Arm (CMA)
72
Rack Mounting the HP Netserver (4-Post)
Inner Flange
Chassis Slide
of CMA
Mount
Outer Flange
of CMA
Rear
Bracket
Pins